Implemented unit
Pneumatic transport
Transport unit for moving particulate material through a connected flowsheet.
Transport Unit - Implemented in DyssolPro
Model pneumatic transport sections inside a connected solids flowsheet. Connect conveying with feed, cyclone separation, gas filtration, and storage.
The DyssolPro process-unit library lists pneumatic transport as an implemented transport unit.
For transport sections that affect the surrounding solids process.
Use pneumatic transport together with separators, filters, bunkers, and feed units when conveying cannot be ignored in the process model.
Implemented unit
Transport unit for moving particulate material through a connected flowsheet.
Common neighbor
Cyclones are often used downstream of pneumatic transport to separate solids from gas.
Connect transport, separation, and storage instead of treating conveying as a fixed delay.
Represent the transported material with relevant particle properties and mass-flow profile.
Route transported solids-gas streams to cyclone, filter gas, bunker, or outlet units.
Study how upstream feed changes propagate into downstream separation and storage.
| Study | What Dyssol connects | Typical result |
|---|---|---|
| Transport plus separation | Pneumatic transport, cyclone, filter gas, and outlet. | Effect of conveying stream on downstream separation. |
| Feed transients | Time-dependent mass flow and particle properties. | Dynamic propagation through transport and handling units. |
| Custom transport logic | Model Maker and DyssolPro integration. | Company-specific conveying model inside the flowsheet. |
Time-dependent simulation for startup, shutdown, batch, semi-batch, and continuous operating scenarios.
Particle-centered modeling with interdependent properties such as size, composition, and moisture across connected units.
PSD tracking and transformation-matrix workflows for process studies where particle size distribution matters.
Model Maker supports implementation, testing, and validation of company-specific unit models.
Compare parameter sets inside the connected process instead of studying one isolated apparatus.
Use the integrated sensitivity analysis tool for implemented process units in DyssolPro.
Evaluate process settings against target product properties or process-performance metrics.
Extend the model library when a project needs proprietary correlations, geometry, or company-specific logic.
Process-library evidence
The DyssolPro unit library lists Pneumatic transport as an implemented transport unit for connected solids-process flowsheets.
Sources: DyssolPro process-unit library
Yes. The process-unit library lists pneumatic transport under transport.
Yes. Both units are part of the implemented process-unit library and can be connected in a flowsheet.
Yes. Model Maker supports custom unit models, and DyssolTEC can support implementation.
Enter your email and we'll send you a personal download link valid for 48 hours.
Each request gets its own download link instead of a public direct download.
The link stays short-lived, which keeps the trial flow controlled and predictable.
The request and successful download are logged for the DyssolTEC team.
You receive a personal link by email.
The link stays valid for 48 hours.
The request and completed download are logged internally.
Built for software evaluations. The link is sent automatically by email.